tháng 4 23, 2014
Unknown
You may have seen my instructables on paracord bracelets, well this is the
same design with a few variations. I used to reach in my pockets and have to
search for my keys. Now i reach in and go right for the key fob. These can be
all one color, or multi colored.
Step 1: Supplies
-6ft of gutted paracord or 3ft of two different colors (always good to start
with extra)
-Another piece, size depends on how long you want it, 3ft is good to start with (not gutted)
Both will be trimmed and melted when finished.
-Scissors
-Lighter
-Another piece, size depends on how long you want it, 3ft is good to start with (not gutted)
Both will be trimmed and melted when finished.
-Scissors
-Lighter
Step 2: Lanyard Knots
You need to make two lanyard knots, one creating a loop, one ending the
bracelet. All of the instructions are shown through the pictures.
Step 3: Cobra Weave
Multi-colored instructionsSingle colored
instruction
Both
-Tie the two colors together using a square knot or melt them together-Put the piece behind the other piece with lanyard knots, equally on both sides(Square knot centered)
-Create an "S" with the piece on the right and then take the piece on the left and slide it through the bottom part of the "S" and then behind the middle and up through the left side.
-Pull tight and repeat.-I recently saw the Paracord Survival Necklace in which there is a flint inside of the cobra weave. That idea can be easily included in this as well. Just place your flint steel in between the two lanyard knots and continue as if it weren't there. If you make a longer key fob with the flint steel it can easily be considered a Survival Key Fob.
Both
-Tie the two colors together using a square knot or melt them together-Put the piece behind the other piece with lanyard knots, equally on both sides(Square knot centered)
-Create an "S" with the piece on the right and then take the piece on the left and slide it through the bottom part of the "S" and then behind the middle and up through the left side.
-Pull tight and repeat.-I recently saw the Paracord Survival Necklace in which there is a flint inside of the cobra weave. That idea can be easily included in this as well. Just place your flint steel in between the two lanyard knots and continue as if it weren't there. If you make a longer key fob with the flint steel it can easily be considered a Survival Key Fob.
Step 4: Variations
These can be made into
-zipper pulls
-Self Defense (Longer so that you can swing keys at attacker)
-Knife lanyard
-Etc
Have fun, and leave a comment on what else these could be used for.
-zipper pulls
-Self Defense (Longer so that you can swing keys at attacker)
-Knife lanyard
-Etc
Have fun, and leave a comment on what else these could be used for.
Posted in: Cuộc sống
